|
Contact Info:
ECS2 Group Inc.
9-6975 Meadowvale Town
Centre Circle, Suite 322
Mississauga,
Ontario L5N 2V7
Canada
Phone: (905)
593-2345
E-mail us
here.
|
 |
StandardALERT™ is the most
economical version of the ALERT Analysis System. It contains all
of the manual analysis tools found in ExpertALERT but none of
the automated diagnostics.
|
StandardALERT™
StandardALERT™ contains all of the manual analysis tools found
in AdvancedALERT™
and ExpertALERT™.
The software will automatically screen the data for alarms or
exceedances in up to 63 alarm bands in per test location and up
to 99 test locations per machine. This software is appropriate
for those on a budget or who don’t have machines or applications
that lend themselves to automated diagnostics.
StandardALERT users can easily upgrade to AdvancedALERT or
ExpertALERT in order to take advantage of automated bearing wear
detection and or full machine fault diagnostics.
StandardALERT automatically screens and creates an exception
report on up to 6 spectra (3 axis in 2 frequency ranges) and 3
overall RMS values per test location. Up to 99 test locations
can be defined per machine. The exception report contains the
levels of the peaks, exceedances over baseline, frequencies,
axis and test locations. This information allows analysts to
quickly identify alarm conditions and hone in on the suspect
information in the graphs. In fact, there are 63 distinct alarm
bands automatically screened by StandardALERT on each machine
test location. All 63 alarms may be presented in chart format,
or just the exceedances reported in the exception report.
|
|
Contact us for more info
or product brochure. |
|
