|
Datastick DS140-1A Piezoelectric Industrial
Accelerometer
 This
industrial-grade accelerometer is suitable for use with the Datastick
VSA-1212 or any other device that uses ICP®-type accelerometers.
- Sensitivity: ± 15% 100 mV/g
- Frequency response:
- ± 3 dB: 0.5 - 15,000 Hz (± 3 dB: 30 - 900,000 CPM)
- ± 10%: 0.7 - 7,000 Hz (± 10%: 42 - 420,000 CPM)
- Electrical Noise (Typical):
- Broadband: 2.5 Hz - 25 kHz: 325μg, rms
- Spectral:
- 10 Hz: 28μg/Hz
- 100 Hz: 3.3μg/Hz
- 1000 Hz: 1.6μg/Hz
- Dynamic Range: +50 g, peak
- Power requirement: Voltage source: 18 - 30 VDC
- Constant current excitation: 2 - 10 mA
- Output Impedance: Max <100 ohm
- Bias Output Voltage: 7 - 14 VDC
- Temperature Range: -58 - 250°F (-50 - 121°C)
- Maximum Shock Protection: 5,000 g, peak
- Electrical Case Isolation: >108 ohm
- Sealing: Welded, Hermetic
- Submersible Depth: 500 ft
- Sensing Element: PZT Ceramic
- Sensing Structure: Shear Mode
- Weight: 0.7 oz. (20 grams)
- Case Material: 316L Stainless Steel
- Mounting Hole: 1/4-28 (includes removable
1/4-28 mounting stud)
- Cable:
Requires
DSC-MMB6 Cable (Cable not included.)
DSM-112 Magnetic Accelerometer Mount
Rare-earth two-pole magnetic mount for mounting on flat or curved
surfaces. Stainless steel, 1-inch diameter, 0.7 inch high, with 1/4-28
integral stud.
|
