RC-4-Y Rugged Case for VSA-1214,
VSA-1215, and VSA-2215
Fully assembled ruggedized case for a Datastick VSA-1214 or VSA-1215
Vibration Spectrum Analyzer module with a Palm TX handheld. Includes
RC-1, DB-1, and PK-1 with pass-through BNC connector, cable, and power
input. Assembled.
- no assembly required
- handheld, module, and cable insert securely in case
- PDA is easy to use through recessed, clear plastic screen
- pass-through BNC connector and interior cable for sensor
connection
- waterproof, dustproof & airtight
- crushproof
RC-3-Y Rugged Case for VSA-1212
Fully assembled ruggedized case for a Datastick VSA-1212 Vibration
Spectrum Analyzer module with the appropriate Palm Powered handheld*.
Includes RC-1, DB-1, and PK-1 with pass-through BNC connector, cable,
and power input. Assembled.
- no assembly required
- handheld, module, and cable insert securely in case
- PDA is easy to use through recessed, clear plastic screen
- pass-through BNC connector and interior cable for sensor
connection
- waterproof, dustproof & airtight
- crushproof
* Palm™ Tungsten™ T, T2, T3, or C or Garmin® iQue 3200 or iQue 3600
handheld
RC-2-Y Rugged Case for DAS
Fully assembled ruggedized case for a Datastick DAS-1254 or DAS-1294
data acquisition module with the appropriate Palm Powered handheld*.
Includes RC-1, DB-1, and CK-1, assembled
- no assembly required
- handheld, module, and cable insert securely in case
- PDA is easy to use through recessed, clear plastic screen
- built-in portals for cables for sensors and other connections
- waterproof, dustproof & airtight
- crushproof
* Palm™ Tungsten™ T, T2, T3, or C or Garmin® iQue
3200 or iQue 3600 handheld
RC-1Y Rugged Case
- easily use PDA through recessed, clear plastic screen
- portals for printer, GPS, other cable connections
- waterproof, dustproof & airtight
- crushproof
Requires DB-1 Deep Box Kit when used with a
Palm handheld and a Datastick data acquisition peripheral. CK-1 is
recommended for cable connectivity.
DB-1Y Deep Box Kit
Allows extra space for RC-1 to be used with a Palm
handheld and a Datastick data acquisition peripheral. Also has
six mounting bosses for custom applications such as circuit boards and
added battery mounting.
CK-1 Through the Box Connectivity
Kit
Through the box connectivity kit allows for multiple sizes of sensor
cables to pass through the case and connect to your PDA.
CK-1 is recommended for cable connectivity.
PK-1 Through the Box Pod Kit
Through the box POD allows the end user to customize connectivity to
their PDA. The end cap (gray area) can be modified to fit multiple
connections.
SR-1 Screen Replacement Kit
The screen replacement kit includes 3 new screens, silicon gaskets for
the box, Buna gasket for the screen, and a model specific foam insert.
This kit can also be used to convert to a different model PDA.
BC-1 Belt Clip
Allows the RC-1 to be attached to any belt or strap. Belt clip is
indexable to keep unit from being accidentally pushed off when sitting.
NS-1 Neck Strap
Mounts to the back of the case allowing the RC-1 to comfortably hang
around the user's neck. High quality neoprene padded neck strap.
|
