|
Contact Info:
ECS2 Group Inc.
9-6975 Meadowvale Town
Centre Circle, Suite 322
Mississauga,
Ontario L5N 2V7
Canada
Phone: (905)
593-2345
E-mail us
here.
|
 |
AdvancedALERT® contains
BearingALERT™ technology to automatically detect rolling element
bearing wear without requiring bearing information.
AdvancedALERT also contains the data screening capabilities of
StandardALERT™.
|
AdvancedALERT
AdvancedALERT contains all of the data screening features of
StandardALERT™ but also
includes BearingALERT for automated rolling element wear
detection. This software is appropriate for those who are
primarily interested in detecting bearing wear or who don’t mind
spending extra time doing manual analysis. Users may opt to
upgade to ExpertALERT™ and
take full advantage of its complete automated diagnostic system
at anytime
Download a
Technical Paper on BearingALERT Diagnostics
BearingALERT combines and automates a number of analysis
techniques in order to automatically detect rolling element
bearing wear without requiring bearing make or model number.
These techniques include: cepstrum analysis, order
normalization, automatic peak extraction, noise floor
calculations, high frequency demodulation or envelop analysis,
and a rule based expert system. BearingALERT technology has been
used by DLI engineers and clients in virtually every industry
worldwide for over 15 years with great success.
Although specific bearing information is not required or used by
BearingALERT, users retain the capability of defining up to 4
bearings per test point and overlaying calculated bearing
frequencies on the graphs. AdvancedALERT includes a bearing
database with over 9000 bearing and users may add bearing
information to this database as required.
AdvancedALERT reports cite 4 levels of bearing wear severity
(Slight, Moderate, Serious and Extreme) which can be trended
over time in order to realize the maximum life from the
bearings. Fault patterns, including peaks in the spectra and
demodulated data, are included in the report to allow users to
easily confirm the faults with manual analysis.
AdvancedALERT also creates an exception report that includes a
summary of peaks that exceed alarm in up to 10 user defined and
5 undefined frequency bands per spectrum. The exception report
contains the level of the peak, exceedance over baseline,
frequency, axis and test location.This report helps point users
to other potential machine faults including unbalance,
misalignment, looseness and gear wear etc. AdvancedALERT will
automatically analyze and report on 63 distinct alarm bands per
test location and up to 99 test locations per machine. This is
accomplished by AdvancedALERT in a matter of seconds.
AdvancedALERT contains all of the manual analysis capabilities
found in ExpertALERT. |
Contact us for more info or
product brochure. |
