Machine Health Care.

P:  905.593.2345   or   E-mail

Predictive Maintenance Services and Trainings Worldwide.

 

 

Contact Info:

ECS2 Group Inc.

9-6975 Meadowvale Town Centre Circle, Suite 322

Mississauga, Ontario L5N 2V7

Canada

Phone: (905) 593-2345

E-mail us here.

 

VSA-1214 and VSA-1215

Hardware Modules

VSA with Palm TX

Description

The VSA™-1214 and VSA-1215 hardware modules attach firmly to Palm TX handheld computers to form compact, extremely portable instruments. The Palm TX supplies the computing power and 100 MB of data storage, while the Datastick® VSA hardare module supplies the sensor power and interface. SD (Secure Digital) memory cards — up to 2 GB each — provide virtually unlimited auxiliary storage.

The VSA hardware modules each have a standard BNC connector and a very low-noise input that accommodates and powers almost any ICP®-type piezoelectric accelerometer. In addition, the VSA-1215 can accomodate ICP-type velocity sensors.

Power

The VSA modules have internal rechargeable Li-ion batteries and advanced power management capabilities that typically stretch the VSA-1214 to four hours between recharges on an average duty cycle (you can recharge on your lunch break) and the VSA-1215 can go a full shift or longer.

An optional 3000 mA/h rechargeable external bettey pack is available if you need more power, and it gives you the added benefit of powering or recharging BOTH the VSA module and the Palm TX handheld computer.

Key Features

  • Uses and powers standard ICP-type piezoelectric accelerometers
  • Attaches to high-performance Palm TX handheld computer
  • Extremely low noise floor
  • Self-powered or optional external power
  • Weighs 10 oz with Palm TX handheld computer

Key Specifications
  • Sensor input: Standard BNC connector
  • Sensor excitation:
    • VSA-1214: 24V, 20 mA
    • VSA-1215: Switchable on / off with selectable voltage and current: 5, 12, 18, or 24VDC, and 2, 5, 10, 20, or 24 mA
  • Sensor types:
    • VSA-1214: ICP -type piezoelectric accelerometers
    • VSA-1215: ICP -type piezoelectric accelerometers and ICP-type piezoelectric velocity sensors
  • Sensor input ranges:
    • VSA-1214: 0-5 g, 0-20 g
    • VSA-1215: 0-1 g, 0-2 g, 0-5 g, 0-10 g, 0-20 g, or 0-50 g
  • Antialiasing filter: 10th order hardware low-pass
  • A-to-D resolution: 12 bits
  • Dynamic range:
    • VSA-1214: 90 dB overall, 65 dB per input range
    • VSA-1215: 130 dB overall, 65 db per input range
  • A-to-D internal sample rate: up to 40 KHz max
  • Frequency range:
    • VSA-1214: up to 10 kHz
    • VSA-1215: up to 20 kHz
  • FFT resolution:
    • VSA-1214: 400 / 800 / 1600 lines
    • VSA-1215: 400 / 800 / 1600 / 3200 lines
  • Supported handheld computer: Palm TX
  • Power: Internal rechargeable 800 mA/h li-ion battery (Optional external 4800 mA/h 5 V rechargeable li-ion battery, and external 120/240 VAC to 5 VDC, 1 A regulated wall transformer are available)
  • Dimensions and weight with Palm TX handheld computer: Approx. 5.75 x 3.125 x 1.875 inches (146 x 79 x 48 mm); 10 ounces (283 g).

This page is Copyright 2008 Datastick Systems, Inc. Used with permission.

P:  905.593.2345   or   E-mail

Equipment Condition Sustainable Solutions

Copyright 2007, ECS2 Group Inc.  

 

                                                                                                          Banner